<?xml version="1.0" encoding="UTF-8"?>
<rss xmlns:dc="http://purl.org/dc/elements/1.1/" version="2.0">
  <channel>
    <title>TEDE Coleção:</title>
    <link>http://www.bdtd.uerj.br/handle/1/3663</link>
    <description />
    <pubDate>Wed, 18 Nov 2026 11:44:06 GMT</pubDate>
    <dc:date>2026-11-18T11:44:06Z</dc:date>
    <item>
      <title>Aplicação de box-behnken na otimização da porosidade de ZnFe₂O₄ processada por freeze casting</title>
      <link>http://www.bdtd.uerj.br/handle/1/26459</link>
      <description>Título: Aplicação de box-behnken na otimização da porosidade de ZnFe₂O₄ processada por freeze casting
Autor: Pimentel, Maick Silveira
Primeiro orientador: Aguilera, Letícia dos Santos
Abstract: The development of porous ceramic materials with controlled microstructures constitutes a promising strategy for technological applications requiring high surface area, low density, and specific functional properties, contributing to the Sustainable Development Goals (SDGs), particularly SDG 9 – Industry, Innovation and Infrastructure, through the development of advanced materials, and SDG 12 – Responsible Consumption and Production, through the use of methodologies aimed at reducing the consumption of raw materials, energy, and experimental time. In this context, this study aimed to apply the Box-Behnken experimental design to optimize the apparent porosity of zinc ferrite (ZnFe₂O₄) structures produced by the freeze casting method. ZnFe₂O₄ nanoparticles were obtained by solution combustion and used to prepare aqueous suspensions containing different concentrations of polyethylene glycol (PEG-4000). The experimental design considered three independent variables: sintering temperature (1100, 1200, and 1300 °C), isothermal holding time (1, 2, and 3 h), and PEG concentration (2, 6, and 10%), resulting in fifteen experimental conditions according to the Box-Behnken design. After directional freezing, the samples were freeze-dried, sintered, and characterized by scanning electron microscopy and the Archimedes method to determine their microstructure, apparent density, and apparent porosity. The results demonstrated that increasing the sintering temperature promoted greater densification of the ceramic walls and reduced porosity, whereas higher PEG concentrations favored the formation of more open structures with high connectivity. Response Surface Methodology identified, within the experimental region investigated, a condition associated with high apparent porosity, corresponding to a temperature of 1176.77 °C, an isothermal holding time of 1.77 h, and a PEG-4000 concentration of 10%, for which an apparent porosity of 79.69% was predicted. Experimental validation of this condition resulted in an apparent porosity of 70.33 ± 4.12% and an apparent density of 1.19 ± 0.25 g/cm³. Although the experimental value was lower than that predicted by the model, the result demonstrated the ability of the identified processing region to produce structures with an apparent porosity above 70%. The integration of freeze casting, Box-Behnken experimental design, and Response Surface Methodology proved suitable for investigating and guiding the processing of porous ZnFe₂O₄ structures, providing an experimental basis for further optimization and application studies.
Instituição: Universidade do Estado do Rio de Janeiro
Tipo do documento: Dissertação</description>
      <pubDate>Fri, 24 Jul 2026 00:00:00 GMT</pubDate>
      <guid isPermaLink="false">http://www.bdtd.uerj.br/handle/1/26459</guid>
      <dc:date>2026-07-24T00:00:00Z</dc:date>
    </item>
    <item>
      <title>Desgaste do aço RAVUR-500 e análise das tensões residuais sob condições tribológicas</title>
      <link>http://www.bdtd.uerj.br/handle/1/26436</link>
      <description>Título: Desgaste do aço RAVUR-500 e análise das tensões residuais sob condições tribológicas
Autor: Silva, Adilson Pinto da
Primeiro orientador: Bastos, Ivan Napoleão
Abstract: The growing demand for wear-resistant steels requires an understanding of their &#xD;
behavior under sliding contact and the mechanical changes that develop at the surface. This &#xD;
study characterizes the wear of RAVUR-500 steel under tribological conditions and monitors &#xD;
the evolution of residual stresses near the resulting wear tracks. Disc-shaped specimens were &#xD;
prepared and subjected to dry sliding wear tests at room temperature in a pin-on-disk &#xD;
configuration compatible with the method described in ASTM G99-17, using an alumina ball &#xD;
as the counterbody and different combinations of normal force and sliding distance. The &#xD;
investigation included metallographic characterization, estimation of Hertzian contact stress &#xD;
and maximum shear stress, contact profilometry to evaluate the wear tracks and determine worn &#xD;
and deformed volumes, and residual stress measurements by X-ray diffraction using the sin²ψ &#xD;
method. Metallographic analysis confirmed a predominantly martensitic microstructure, &#xD;
associated with the high hardness of the material. Increasing the normal force increased the &#xD;
mechanical severity of the contact, although the wear-track dimensions did not exhibit a direct &#xD;
linear relationship with either the load or the sliding distance. The transverse profiles revealed &#xD;
the combined effects of material removal, groove formation, microcutting, localized plastic &#xD;
deformation, and material displacement toward the edges of the wear tracks. Residual stresses &#xD;
remained compressive before and after the tests, but their magnitude varied throughout sliding, &#xD;
with an initial reduction followed by increased compression at longer sliding distances. It is &#xD;
concluded that the tribological behavior of RAVUR-500 results from the interaction among &#xD;
microstructure, contact severity, sliding distance, material removal and redistribution &#xD;
mechanisms, and the evolution of residual stresses. This integrated approach contributes to a &#xD;
more comprehensive assessment of the surface changes undergone by the material under sliding &#xD;
contact.
Instituição: Universidade do Estado do Rio de Janeiro
Tipo do documento: Dissertação</description>
      <pubDate>Thu, 01 Oct 2026 00:00:00 GMT</pubDate>
      <guid isPermaLink="false">http://www.bdtd.uerj.br/handle/1/26436</guid>
      <dc:date>2026-10-01T00:00:00Z</dc:date>
    </item>
    <item>
      <title>Síntese e caracterização de hidroxiapatita obtida a partir de casca de ovo de galinha para aplicações em biomateriais</title>
      <link>http://www.bdtd.uerj.br/handle/1/26420</link>
      <description>Título: Síntese e caracterização de hidroxiapatita obtida a partir de casca de ovo de galinha para aplicações em biomateriais
Autor: Correa, Rômulo Debossan
Primeiro orientador: Aguilera, Letícia dos Santos
Abstract: Hydroxyapatite (HAp) is a bioceramic widely used in bone repair and regenerationduetoits biocompatibility, bioactivity, and chemical similarity to the mineral phase of bonetissue.In this context, the use of calcium-rich biogenic waste, such as chicken eggshells, representsasustainable alternative for biomaterial production, combining waste valorization withreduceddependence on synthetic precursors. This study aimed to synthesize, characterize, andbiologically evaluate biogenic hydroxyapatite obtained from chicken eggshells andtoproduceporous scaf olds by freeze casting, integrating the optimization of a synthesis route basedonawaste-derived precursor with the processing of porous structures intended for bonetissueengineering applications. HAp was synthesized by coprecipitation under sixdifferentprocessing conditions, followed by structural, chemical, and microstructural characterization.Route 6 showed the best performance among the evaluated conditions, with a satisfactoryRietveld refinement fit (GOF = 1.14) and a predominance of hydroxyapatite, withcrystallitesizes of 12.29 nm for the hexagonal phase and 33.29 nm for the monoclinic phase. Aftersintering, a system composed of hydroxyapatite and tricalcium phosphates was identified,with a GOF of 1.40. Freeze-casting processing resulted in scaf olds with orientedchannels,interconnected pores, and an anisotropic architecture, exhibiting an apparent densityrangingfrom 1.50 to 1.81 g·cm⁻³, a densification of approximately 52.67%, and an openporosityofapproximately 26.27%. Biological evaluation, performed through cytotoxicityassays,microscopy, gene expression analysis, and assessment of cell–material interactions, indicatedmaintenance of cell viability and absence of relevant morphological alterations, as well asadhesion and spreading of HaCaT cells on the HAp surface. The results demonstratethefeasibility of converting an abundant biogenic waste into hydroxyapatite and applyingit tothefabrication of porous structures, constituting an approach that combines sustainability, controlof synthesis conditions, and scaf old processing. Thus, this study contributes tothedevelopment of alternative routes for the production and processing of calciumphosphate-based bioceramics with promising physicochemical, structural, and biological characteristicsfor bone repair and regeneration applications.
Instituição: Universidade do Estado do Rio de Janeiro
Tipo do documento: Dissertação</description>
      <pubDate>Tue, 04 Aug 2026 00:00:00 GMT</pubDate>
      <guid isPermaLink="false">http://www.bdtd.uerj.br/handle/1/26420</guid>
      <dc:date>2026-08-04T00:00:00Z</dc:date>
    </item>
    <item>
      <title>Estudo da energia de fratura em modos I e II em juntas adesivas de laminados de fibra de carbono nas configurações QUAD e Double-Double</title>
      <link>http://www.bdtd.uerj.br/handle/1/26409</link>
      <description>Título: Estudo da energia de fratura em modos I e II em juntas adesivas de laminados de fibra de carbono nas configurações QUAD e Double-Double
Autor: Passos, Diego Schumacker dos
Primeiro orientador: Sampaio, Eduardo Martins
Abstract: Carbon fiber reinforced polymer matrix composites have been widely used in structural applications due to their high strength-to-weight ratio and good resistance to fatigue and corrosion. However, understanding the fracture behavior of adhesive joints in these materials still represents a significant challenge, especially when different laminate stacking architectures are considered. In this context, the present study investigated the influence of the stacking sequence on the fracture toughness of adhesive joints manufactured with carbon fiber laminates, considering quad and double-double configurations. Initially, the specimens were manufactured through a hand lay-up process and subsequently characterized in terms of their mechanical properties by means of uniaxial tensile tests, aiming to evaluate the structural equivalence between the analyzed architectures. Subsequently, fracture toughness was experimentally characterized under Mode I and Mode II loading using the Double Cantilever Beam (DCB) and End-Notched Flexure (ENF) tests, respectively. The experimental results were complemented by analyses of the fracture surfaces and by the application of the Digital Image Correlation (DIC) technique, used to map the displacement fields in the crack tip region during the tests. The results indicated that the stacking architecture significantly influences the fracture behavior of adhesive joints. Under Mode I loading, the QUAD configuration presented the highest critical fracture energy values, predominantly associated with delamination accompanied by an intense fiber bridging mechanism. On the other hand, the double-double configurations showed superior performance under Mode II loading, exhibiting higher critical fracture energy values in shear, attributed to a more homogeneous distribution of interlaminar stresses. Analyses revealed different failure mechanisms among the analyzed configurations, including adhesive failure, cohesive failure and laminate delamination, while the displacement fields obtained through DIC corroborated the experimentally observed behavior. Overall, the results contribute to a better understanding of the fracture behavior of adhesive joints in carbon fiber laminated composites and may assist in the design and dimensioning of composite structures subjected to different loading modes.
Instituição: Universidade do Estado do Rio de Janeiro
Tipo do documento: Dissertação</description>
      <pubDate>Fri, 04 Sep 2026 00:00:00 GMT</pubDate>
      <guid isPermaLink="false">http://www.bdtd.uerj.br/handle/1/26409</guid>
      <dc:date>2026-09-04T00:00:00Z</dc:date>
    </item>
  </channel>
</rss>

